 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Data Sheet Features * * * * * * * * * * * For CDMA-ZIF Cellular/PCS applications Usable bandwidth 25 MHz at 881.5 MHz Usable bandwidth 60 MHz at 1960 MHz Compatible with leading chipset suppliers Low loss High attenuation Single-ended input, 50 Balanced output, 100 Ceramic Chip Scale Package (CSP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Part Number 856565 881.5/1960 MHz SAW Filter Package Surface Mount 2.00 x 1.50 x 0.46 mm Pin Configuration Bottom View 1 2 3 4 10 0.46 NOM. 0.50 MAX. 2.00 1.85 0.27 0.30 0.26 1.50 1.35 5 9 8 7 6 0.65 0.26 0.45 Pin No. 1 4 6,7 8,9 2,3,5,10 Description SE Cellular input SE PCS input Balanced PCS output Balanced Cellular output Case ground Dimensions shown are nominal in millimeters All tolerances are 0.10mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 1 of 9 Preliminary Data Sheet Operating Temperature Range: (2) +25 oC Part Number 856565 881.5/1960 MHz SAW Filter Electrical Cellular Specifications (1) Parameter (3) Center Frequency Maximum Insertion Loss 869 - 894 MHz Absolute Attenuation 0.2 - 760 MHz 760 - 824 MHz 824 - 849 MHz 915 - 960 MHz 960 - 3000 MHz Amplitude Ripple 869 - 894 MHz Output Amplitude Balance (|S31/S21|) 869 - 894 MHz Output Phase Balance [(S31)-(S21)+180] 869 - 894 MHz Input/Output VSWR 869 - 894 MHz Optimal Source Impedance (4) Optimal Load Impedance (Balanced) (4) Notes: 1. 2. 3. 4. All specifications are based on the Sawtek reference test system In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Minimum 50 45 35 23 45 -1 -5 - Typical 881.5 1.6 58 50 40 28 53 0.3 -0.7 -2/+2 1.5 50 137+j84 Maximum 2.1 1 1 5 1.92 - Unit MHz dB dB dB dB dB dB dB p-p dB degree Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 2 of 9 Preliminary Data Sheet Operating Temperature Range: (2) -30 to +85 oC Part Number 856565 881.5/1960 MHz SAW Filter Electrical Cellular Specifications (1) Parameter (3) Center Frequency Maximum Insertion Loss 869 - 894 MHz 869 - 894 MHz (-40 to +85 C) Absolute Attenuation 0.2 - 760 MHz 760 - 824 MHz 824 - 849 MHz 915 - 960 MHz 960 - 3000 MHz Amplitude Ripple 869 - 894 MHz Output Amplitude Balance (|S31/S21|) 869 - 894 MHz Output Phase Balance [(S31)-(S21)+180] 869 - 894 MHz Input/Output VSWR 869 - 894 MHz Optimal Source Impedance (4) Optimal Load Impedance (Balanced) (4) Notes: 1. 2. 3. 4. All specifications are based on the Sawtek reference test system In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Minimum 50 45 35 21 45 -1 -5 - Typical 881.5 1.6 1.6 58 50 40 28 53 0.3 -0.7 -2/+2 1.5 50 137+j84 Maximum 2.1 2.8 1 1 5 1.92 - Unit MHz dB dB dB dB dB dB dB dB p-p dB degree Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 3 of 9 Preliminary Data Sheet Part Number 856565 881.5/1960 MHz SAW Filter Typical Cellular Performance (at +25oC) Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 4 of 9 Preliminary Data Sheet Operating Temperature Range: (2) +25 oC Part Number 856565 881.5/1960 MHz SAW Filter PCS Electrical Specifications (1) Parameter (3) Center Frequency Maximum Insertion Loss 1930 - 1990 MHz Absolute Attenuation 10 - 1850 MHz 1850 - 1910 MHz 2040 - 2200 MHz 2200 - 2800 MHz 2800 - 3400 MHz 3400 - 6000 MHz Amplitude Ripple 1930 - 1990 MHz Output Amplitude Balance (|S31/S21|) 1930 - 1990 MHz Output Phase Balance [(S31)-(S21)+180] 1930 - 1990 MHz Input VSWR 1930 - 1990 MHz Output VSWR 1930 - 1990 MHz Optimal Source Impedance (4) Optimal Load Impedance (Balanced) (4) Notes: 1. 2. 3. 4. All specifications are based on the Sawtek reference test system In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Minimum 35 19 25 30 40 40 -1.9 -12 - Typical 1960 2.2 38 25 28 35 45 45 0.8 1.31 8 1.9 1.8 50 120 + j98 Maximum 2.6 2 1.9 12 2.3 2.2 - Unit MHz dB dB dB dB dB dB dB dB p-p dB degree Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 5 of 9 Preliminary Data Sheet Operating Temperature Range: (2) -30 to +85 oC Part Number 856565 881.5/1960 MHz SAW Filter PCS Electrical Specifications (1) Parameter (3) Center Frequency Maximum Insertion Loss 1930 - 1990 MHz 1930 - 1990 MHz (-40to +85 C) Absolute Attenuation 10 - 1850 MHz 1850 - 1910 MHz 1850 - 1910 MHz (+15 to +65 C) 2040 - 2200 MHz 2200 - 2800 MHz 2800 - 3400 MHz 3400 - 6000 MHz Amplitude Ripple 1930 - 1990 MHz Output Amplitude Balance (|S31/S21|) 1930 - 1990 MHz Output Phase Balance [(S31)-(S21)+180] 1930 - 1990 MHz Input VSWR 1930 - 1990 MHz Output VSWR 1930 - 1990 MHz Optimal Source Impedance (4) Optimal Load Impedance (Balanced) (4) Notes: 1. 2. 3. 4. All specifications are based on the Sawtek reference test system In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Minimum 35 15 18 25 30 40 40 -1.9 -12 - Typical 1960 2.2 2.2 38 25 25 28 35 45 45 0.8 1.31 8 1.9 1.8 50 120 + j98 Maximum 3.0 4.1 2 1.9 12 2.3 2.2 - Unit MHz dB dB dB dB dB dB dB dB dB dB p-p dB degree Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 6 of 9 Preliminary Data Sheet Part Number 856565 881.5/1960 MHz SAW Filter PCS Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 7 of 9 Preliminary Data Sheet Actual matching values may vary due to PCB layout and parasitics Part Number 856565 881.5/1960 MHz SAW Filter Matching Schematics 4pF 881.5 MHz 50 Single-ended Input 1 8 22nH 100 50 2,3,5,10 9 4pF 100 Balanced Output 4pF 881.5 MHz 50 Single-ended Input 1 8 27nH 150 50 2,3,5,10 9 4pF 150 Balanced Output 1.2pF 1960 MHz 50 Single-ended Input 4 6 15nH 100 50 2,3,5,10 7 1.2pF 100 Balanced Output 1pF 1960 MHz 50 Single-ended Input 4 6 20nH 150 50 2,3,5,10 7 1pF 150 Balanced Output Marking Marking code MFG site PCB Footprint 1.95 0.17 0.36 30 M WWY ID dot Date code 0.75 0.55 1.45 0.40 0.36 The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Subject to change or obsolescence without notice Rev A 29-Jun-2006 Page 8 of 9 Preliminary Data Sheet 2.7 8.8 O330 Part Number 856565 881.5/1960 MHz SAW Filter Tape and Reel ID dot 4.0 0.3 2.0 O1.5 A 1.75 2.34 3.5 8.0 4.0 O1.0 O102 O20.2 O13.0 Direction of travel 2.0 1.09 Section A-A 1.83 A Dimensions shown are nominal in millimeters Packaging quantity: 10000 units/reel Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol T Tstg Minimum -30 -40 Maximum +85 +85 Unit o o C C Important Notes Warnings * * * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips S-Parameters Qualification Flowchart RoHS Information Soldering Profile Other Technical Information Sawtek's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Rev A Or contact one of our worldwide Network of sales offices, representatives or distributors 29-Jun-2006 Page 9 of 9 |
Price & Availability of 856565
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |